When you need increased privacy, our Winged Slat® is the answer. With the proven quality and durability of our standard slats plus unique “wings” for extra screening and security, these slats are self-locking — no channels needed!
Design – Our patented Winged Slat® has a rigid, flat-tubular body, with “legs” inside for extra support. Flexible and resilient wing portions are positioned on each side of the slat body. Serrations are added to the wings for easier installation and locking power.Standard Heights – 4, 5, 6, 7 and 8 feet. For heights exceeding 7 feet, we recommend using (2) two half sizes (i.e. for 10 ft. fence use two 5ft. slats), as this will help during installation and will not lessen privacy.Slat Length – 2″ shorter than overall height of fence.Wind Load and Privacy Factor – Approximately 90%. (Based on wire/mesh used-stretch tension).Installation Instructions – Insert vertical slats with angle cut end downward. Winged portion interlocks with chain link knuckles.Product PDF – Winged Slat
| Slat Type | Slat Width | Mesh Size | Wire Gauge | Coverage Area |
| Winged Slat | 1 1/4″ | 2″ | 9″ only | 82 |
Available Colors
Royal Blue – Light Blue – Redwood – Green – Brown – Beige – Black – Gray – White
HDPE Technical Properties
Melt Index – (.6) A low melt index indicates improved stress and crack resistance.
Density – (.957) Polyethylene ranges anywhere from .914 to .960 in density. A higher density yields maximum stiffness without becoming overly brittle.
Minimum Temperature – (-76° F) Polyethylene stays flexible even at this temperature extreme.
Maximum Temperature – (250°) Polyethylene does not distort until reaching this temperature.
Tensile Strength – (3,700 psi) Material will not suffer distortion at letter loads or impacts.