Bottom Locking Slats

bottom-locking-slats-product-imageFor over 30 years, Pexco PDS® HDPE Fence Products has been the largest manufacturer of chain link and ornamental fence enhancement products, marketed under the PDS® brand name. Produced in our west and east coast manufacturing facilities, PDS® Fence Products are available through most fence distributors in the U.S. and Canada.

Our bottom-locking slats are flat and tubular in shape, with reinforced “legs” for extra durability. They offer a 75% wind load and privacy factor and are 3.5 inches shorter than the overall height of the fence. Standard heights are 4, 5, 6, 7, 8, 10 and 12 feet, with special heights available upon request. 10 feet of slat is provided in each bag.

Design –  Bottom-locking slats are flat and tubular in shape, with reinforced “legs” inside for extra durability.

Standard Heights – 4, 5, 6, 7, 8, 10 and 12 feet. Special heights available upon request.

Wind Load and Privacy Factor – Approximately 75%.

Slat Length – 3 1/2″ shorter than overall height of fence.

Bottom-Locking Channel – 10 feet provided in each bag.

Warranty – 25 years prorated.

Product PDF – Bottom Locking Slats

Installation Instructions
Step 1: Insert locking channel horizontally in first full diamond at bottom of fence with open side facing up.
Step 2: Insert vertical slats with beveled/notched end downward. Slat engages and interlocks with bottom rail.
Step 3: Push the vertical slat into the horizontal channel to lock in place.

HDPE Technical Properties
Melt Index – (.6) A low melt index indicates improved stress and crack resistance.
Density – (.957) Polyethylene ranges anywhere from .914 to .960 in density. A higher density yields maximum stiffness without becoming overly brittle.
Minimum Temperature – (-76° F) Polyethylene stays flexible even at this temperature extreme.
Maximum Temperature – (250°) Polyethylene does not distort until reaching this temperature.
Tensile Strength – (3,700 psi) Material will not suffer distortion at letter loads or impacts.

Slat Type Slat Width Mesh Size Wire Gauge Slats Per Bag
Bottom Lock 2″ 1 3/32″ 2″ 8, 9, or 11 82
Bottom Lock 2¼” 1¼” 2 1/4″ or 2 3/8″ 11 1/2″ or 12 1/2″ 78
Bottom Lock 1¾” 7/8″ 1 3/4″ 8, 9, or 11 97
7/8″ 2″ 6 97

Available Colors
royal_bluelight_blue redwoodgreenbrown beige blackgray  white
Royal Blue – Light Blue – Redwood – Green – Brown – Beige – Black – Gray – White

Ask for details about the 25-year warranty.