Industrial Pre-Woven is a uniquely styled slat that is mechanically inserted into the chain link wire during the weaving process. Once inserted, the wire is finished above and below the slat (either bow-knuckle or knuckle-over).
Design: Industrial pre-woven slats are flat and tubular in shape, with reinforced “legs” inside for extra durability.
Standard Heights: 4, 5, 6, 7, 8,10 and 12 feet. Special heights available upon request.
Wind Load and Privacy Factor: Approximately 75%.
Upon Special Request: Available in bags that cover 25 linear feet for hand installation jobs.
Installation: Because this slat comes pre-inserted in the chain link fabric, just stretch the wire and tie it up. The result is a fully slatted fence with sight reduction.
Warranty: 25 years prorated.
Product PDF – Industrial Pre-Woven
| Slat Type | Slat Width | Mesh Size | Wire Gauge | Slats Per Crate | Coverage Per Crate |
| Industrial | 2 3/8″ | 3 1/2″ x 5″ | 9 or 10 | 2014 (106 pieces per bag) | 475 linear feet |
Available Colors
Royal Blue – Light Blue – Redwood – Green – Brown – Beige – Black – Gray – White
HDPE Technical Properties
Melt Index – (.6) A low melt index indicates improved stress and crack resistance.
Density – (.957) Polyethylene ranges anywhere from .914 to .960 in density. A higher density yields maximum stiffness without becoming overly brittle.
Minimum Temperature – (-76° F) Polyethylene stays flexible even at this temperature extreme.
Maximum Temperature – (250°) Polyethylene does not distort until reaching this temperature.
Tensile Strength – (3,700 psi) Material will not suffer distortion at letter loads or impacts.