Lite-Link

litelink-slats-product-image

 

Our LiteLink™ slat is one of the most economical chain-link enhancement products available in the market today. Manufactured using the same durable outdoor plastic as our standard tubular fence slats, this single wall “M” shape slat will give you the visual screening and color enhancement you desire at a very affordable price. LiteLink™ also uses our patented Bottom-Locking system for fast and easy installation.

Design – Compact and lightweight, LiteLink’s unique shape enables the slat to self stack. It comes packaged in a box, making it easy to ship and efficient to store.

Standard Height – 4, 5, 6, 7, 8, 10 and 12 feet. Special heights available upon request.

Slat Length – 3½” shorter than overall height of fence.

Wind Load and Privacy Factor – Approximately 75%.

Bottom-Locking Channel – 10 feet provided in each bag.

Warranty – 7 years prorated.

Product PDF – Lite-Link

Installation Instructions
Step 1: Insert locking channel horizontally in first full diamond at bottom of fence with open side facing up.
Step 2: Insert vertical slats with interlocking tab downward. Slat engages and interlocks with bottom rail.
Step 3: Push the vertical slat into the horizontal channel to lock in place.

Slat Type Slat Width Mesh Size Wire Gauge Slats Per Box Coverage Per Box
LiteLink 1 1/4″ 2″, 2 1/4″, or 2 3/8″ 9, 11, or 11 1/2″ 82 10 Linear Feet

Available Colors

royal_bluelight_blue redwood  green  brown beigeblack  graywhite
Royal Blue – Light Blue – Redwood – Green – Brown – Beige – Black – Gray – White

HDPE Technical Properties
Melt Index – (.6) A low melt index indicates improved stress and crack resistance.
Density – (.957) Polyethylene ranges anywhere from .914 to .960 in density. A higher density yields maximum stiffness without becoming overly brittle.
Minimum Temperature – (-76° F) Polyethylene stays flexible even at this temperature extreme.
Maximum Temperature – (250°) Polyethylene does not distort until reaching this temperature.
Tensile Strength – (3,700 psi) Material will not suffer distortion at letter loads or impacts.